Customised
-93-p.jpg?v=faedf514-2b8f-49ef-bdfb-c4c59accaf17)
-93-p.jpg?v=faedf514-2b8f-49ef-bdfb-c4c59accaf17)
Using nylon, laid down in a specific pattern, our standard tail skid weighs in at under 90grams and is approved for installation by the LAA. It uses the existing steel tie down hook at the tail end of the CH750/701 series of aircraft. If fitting during build, you install BEFORE mounting the rudder, if already flying you will need to remove the rudder to fit this part. NOTE hook, washer and nut are NOT included. Use the parts from your kit please.
Photos for illustrative purposes
Photos for illustrative purposes