Fuel & Oil
Our 1/4"NPT fuel level alert kit provides a simple instrument panel alert solution to low fuel conditions. Installed externally to a 1/4"NPT boss on your fuel tank, the red LED will come on in the absence of liquid.
Contains
1 x 1/4" NPT liquid presence detector
1 x Panel mount indicator RED LED, pre-wired with resistor (lights up when detector is 'uncovered')
1 x inline fuse holder and fuse
6m (19') x 20 AWG hook up wire
5 x male electrical connectors
5 x female electrical connectors
200mm Heat shrink
Instructions
IDEAL addition to our HEADER TANK. May be fitted to the lower 'sloped' port or any of the free horizontal ports.
DO NOT CUT THE BLACK HEAT SHRINK AREA WHEN INSTALLING
Sensor:
25cm tails (3 wire, +ve, -ve and 'signal')
Body material Polysulfone
Temperature Range -25 to +80 C
Tightening torque 1.5Nm/13.26lbs in
You must test your installation before use and also check that the system is working from time to time as standard practice.
Image is for illustrative purposes only
Contains
1 x 1/4" NPT liquid presence detector
1 x Panel mount indicator RED LED, pre-wired with resistor (lights up when detector is 'uncovered')
1 x inline fuse holder and fuse
6m (19') x 20 AWG hook up wire
5 x male electrical connectors
5 x female electrical connectors
200mm Heat shrink
Instructions
IDEAL addition to our HEADER TANK. May be fitted to the lower 'sloped' port or any of the free horizontal ports.
DO NOT CUT THE BLACK HEAT SHRINK AREA WHEN INSTALLING
Sensor:
25cm tails (3 wire, +ve, -ve and 'signal')
Body material Polysulfone
Temperature Range -25 to +80 C
Tightening torque 1.5Nm/13.26lbs in
You must test your installation before use and also check that the system is working from time to time as standard practice.
Image is for illustrative purposes only